Technical Parameters
|
Item No. |
SP56-40W-S(S5RGBWW) |
|||
|
Color |
RGBWW |
RGBWW |
RGBWW |
RGBWW |
|
Control Method |
100% synchronization |
Remote and Switch control |
External control |
DMX control |
|
Connection |
2-wire connection |
2-wire connection |
5-wire connection |
5-wire connection |
|
Wattage |
40W |
40W |
40W |
40W |
|
Input Voltage |
AC/DC 12 |
AC12 |
DC12 |
AC/DC12 |
|
Led Chip |
5 in 1 RGBWW |
|||
|
Frequency |
50/60Hz |
|||
|
CRI |
>80Ra |
|||
|
Beam Angle |
30°/60° |
|||
|
IP Rate |
IP68 |
|||
|
Dimension |
Φ177x 102mm |
|||
|
Material |
ABS + PC lens |
|||
|
Warranty |
2 years |
|||
How to Use Our led PAR56 Lights
(V4A/316 Stainless Steel)
Caution:
* PAR56 lamp is for underwater usage and to be installed with housing/niche.
* Used only with toroidal transformer(50-60Hz), electronic is not applicable.
* Connected with water-proof connector or in water-proof manner for avoiding water leakage risk.
* Read carefully the instruction and specification before installation.
* Do not carry lamp by cable in order to avoid risk of water-leakage.
Product Picture & Dimension
| Front View | Back View |
 |
 |
| Side View | Dimension |
 |
 |
Feature
Replace Swimming Pool Lamp
● Patented design & private tooling/moulding.
● IP68 Waterproof (epoxy/resin sealing)
● Absolute RGB/RGBW/RGBWW synchronization with patented RGB/RGBW/RGBWW controller(with remote).
● RGB/RGBW/RGBWW control method: Remote control, Remote & Switch control, WiFi control, External Control, DMX control
● V4A/316 stainless steel is anti-corrosion & good heat dissipation, and less lumens decline.
● Transparent PC cover/lens, anti-corrosion & anti-shock.
● Voltage：AC/ DC 12V
● Frequency: 50/60HZ.
● High quality and brightness LED source.
● Color: RGB/RGBW/RGBWW, Single color – white, red, green, blue, yellow
● Beam angle: SMD 3528/2835/5050/5730: 120°, High power or 30°or 60°.
● Life span: above 50000 hours.
● Life span: above 50000 hours.
● Over current protection.
● CE, RoHs, IP68 certificated.
Application:
Swimming pool, water-fall, park, fountain, garden.
Solving Color Inconsistency Issues with led PAR56 light
The led PAR56 light has revolutionized underwater lighting with its vibrant RGB/RGBW/RGBWW colors and durable 316 stainless steel+PC material. However, color-related issues may affect the user experience. Let's explore common problems and their solutions to ensure your led par56 light displays consistent and charming hues.
A common issue is inconsistent color display and color confusion among multiple led par56 light units. This is because there is no unified device that can send signals and calibrate them in real-time. The solution is simple: you can calibrate and control through our independently developed 2-cable 100% control system. It unifies the color balance settings of all fixtures. The 100% synchronous control function ensures that adjustments are applied evenly, while the light diffusion property of the 316 stainless steel+PC material enhances color consistency by reducing glare.
Another problem is the limited color range in RGBWW mode. Users often find that certain hues cannot be displayed, which is due to incorrect channel configuration. Each led pool light par56 needs correct channel assignment for its RGBWW diodes - refer to the user manual to set the correct dip switch positions, please check the attached diagram. This will unlock the full spectrum. The advanced IC chip protected by the sturdy 316 stainless steel+PC housing can accurately process color data, ensuring that every hue from warm white to bright red is perfectly displayed.
Some installations may have flickering issues during color transitions. This usually indicates voltage fluctuations. The led par56 light has a built-in voltage regulator to stabilize the input power, but pairing it with a dedicated pool light transformer can eliminate voltage instability. Regularly check the 316 stainless steel+PC housing for cracks (which may allow moisture to enter the components) to prevent short circuits that cause flickering. Through these steps, your led par56 light will transition smoothly between RGB/RGBW/RGBWW modes, creating a perfect atmosphere.
LED PAR56 light 2-Wire 100% Synchronisation User Manual
(A) Remote instruction
|
Button/Key |
Function |
Button/Key |
Function |
|
On/Off |
On/Off |
M+ |
Color program forward |
|
M- |
Color program backward |
B+ |
Increase brightness |
|
B- |
Decrease Brightness |
S+ |
Increase speed |
|
S- |
Decrease Speed |
Pause |
White(RGB mix)/White/White(RGBWW) |
|
Color Ring |
Different solid color |
(B) RGB/RGBW/RGBWW Controller instruction
|
Button Function |
Button Function |
|
On/off: switch on/off |
Speed/Brightness +: increase speed or brightness |
|
Speed/Brightness-: decrease speed or brightness |
Color Program: change RGB/RGBW/RGBWW program |
(C)Color changing program
RGB:
1. Red 2. Green 3. Blue 4. Yellow 5. Cyan 6. Purple 7. White
8. Dynamic change: red to green 9. Dynamic change: green to blue 10. Dynamic change: red to blue 11. Dynamic RGB changing 12. Dynamic Colorful changing
13.RGB fading effect 14. Colorful fading effect
RGBW:
1. Red 2. Green 3. Blue 4. White 5.Yellow 6. Cyan 7. Purple 8. White(RGBW mixed white)
9. Dynamic change: red to green 10. Dynamic change: green to blue 11. Dynamic change: red to blue 12. Dynamic RGBW changing 13. Dynamic Colorful changing
14. RGBW fading effect 15. Colorful fading effect
RGBWW:
Red 2. Green 3. Blue 4.Yellow 5. Cyan 6. Purple 7. White(3000K) 8.White(6000K) 9.White(4000K) 10. White(RGBWW mixed white) 11. Dynamic change: red to green
12. Dynamic change: green to blue 13. Dynamic change: red to blue 14. Dynamic colorful changing
15.RGBWW fading effect 16. Colorful fading effect
(D) Connection Diagram
Remark: RGB/RGBW/RGBWW signal is strong enough within 100 meter, make sure the power cable is big enough to carry enough voltage(12V AC/DC) in order to avoid any voltage drop.
1 pc controller could connect 15 pcs lamps, if more than 15 pcs lamps, add amplifier to enhance signal.
(E) Match code/pairing
In order to avoid any unexpected interruption, Match code/Pairing between the controller and remote, then the controller and lamp, please do following 2 steps
Step (1): Remote matches code with controller
Connect the lamp & controller, switch off power, press "on/off" button of remote, then switch on power, the controller will beep within 3 seconds, the controller and remote are paired.
Step (2): Lamp matches code with controller
Connect the lamp & controller, switch off power, press "color program" button of controller, then switch on power, after 5 or above 5 seconds, release "color program" button finger, the lamp turn to white color, the controller and lamps are paired.
Hot Tags: led par56 light, China led par56 light manufacturers, suppliers, factory, Par56 Led Bulb, Led Pool Light Par56, par56 led pool light, 12V Par56 Led Pool Light, Par56 Pool Light, Par 56 Led Lamp
